The Windows® Automated Installation Kit (Windows AIK) is designed to help IT professionals deploy the Windows® 7 operating system.

This document demonstrates a basic example of how to configure and deploy a Windows® image. At the end of this process, you will have a valid answer file, a bootable Windows Preinstallation Environment (Windows PE) CD, and you will have deployed your first custom Windows image. After creating this basic answer file, you can modify it to include additional customizations. You can also automate parts of the process by scripting some of the manual steps in this scenario. For a comprehensive description of all the tools and deployment methods, see the Windows® Automated Installation Kit (Windows AIK) User's Guide (Waik.chm) or http://go.microsoft.com/fwlink/?LinkId=121503.

In this example, you build a basic answer file, and then install Windows using that answer file. This process includes:

Step 1: Building an Answer File

Step 2: Building a Reference Installation

Step 3: Creating Bootable Windows PE Media

Step 4: Capturing the Installation onto a Network Share

Step 5: Deploying from a Network Share

To complete this scenario, you need the following:

• Windows 7 product DVD disk
  
• Windows AIK DVD disc. You can download the Windows AIK .iso file from http://go.microsoft.com/fwlink/?LinkId=136976.
  
• A technician computer
  A technician computer can be any computer on which you will install the Windows Automated Installation Kit (Windows AIK). The technician computer must be running Windows Server® 2003, Windows Vista®, or Windows 7. This computer also requires a network adapter, a working network environment, a DVD-ROM drive, and a CD-R/RW-capable drive (or a combination drive that supports both).
  
• A reference computer
  A reference computer is a fully assembled computer on which you install a customized installation by using the Windows product DVD and an answer file. Once installed, you capture and store an image of the installation on a network share. There are no software requirements for this computer. Both technician and reference computers require a network adapter and a working network environment.
  

  Note:
  The disk-partition requirements are different between BIOS-based and UEFI-based computers. This guide describes how to create an answer file for BIOS-based computers. Most 32-bit and many 64-bit computers are BIOS-based.

• Network connectivity
  
• A USB flash drive (UFD)
  
• CD-ROM burning software
  
• One blank CD-R/RW disc
  
• Optional: a destination computer
  The destination computer is the computer that you intend to deliver to an end user. After you build a reference installation, you will capture and store an image of that installation on a network share. You will then deploy the image from the network share onto the destination computer.
  

  Note:
  For this example, you can reuse the reference computer as your destination computer. After you capture and store an image of the reference installation, you can then reformat the hard drive of the reference computer, returning it to a blank state. The computer will then become your destination computer.

To install the Windows AIK:

1. Insert the Windows AIK DVD into the technician computer's DVD-ROM drive.
   The Setup program automatically starts.
   
2. Follow the online instructions.
   

The first step in creating a custom installation is to build an answer file. You use an answer file to configure Windows settings during installation. For example, you can configure the default Internet Explorer® settings, networking configurations, and other customizations. Additionally, the answer file contains all of the settings that are required for an unattended installation. During installation, you will not be prompted with user interface pages.

In this section, you will create an answer file using Windows System Image Manager (Windows SIM), a utility for creating and modifying unattended answer files and configuration sets. A simple answer file includes basic Windows Setup configuration and minimum Windows Welcome customizations. This example does not import any special drivers, applications, or packages.

After you install the Windows AIK on your technician computer, a sample of this answer file, Corp_autounattended_sample.xml, will be available at C:\Program Files\Windows AIK\Samples.

In this step, you define basic disk configuration and Windows Welcome settings.

1. In the Windows SIM Windows Image pane, expand the Components node to display available settings.
   
2. On the expanded list of components, add the components in the table below to your answer file by right-clicking the component, and then selecting the appropriate configuration pass. This action adds the component to your answer file in the specified configuration pass, or phase, of Windows installation. Adding the optional components allows you to more easily test your installation in Step 2, Building a Reference Installation.
   

   Note:

   Expand the component list in the Windows Image pane until you see the lowest child node from the table below. For example, expand Microsoft-Windows-Setup to see the DiskConfiguration node. Expand the DiskConfiguration node until you see the Disk node. Continue expanding the tree under Microsoft-Windows-Setup until you see the CreatePartition node listed in the table below. Add this CreatePartition node to your answer file. This shortcut adds the setting and all parent settings to your answer file in one step.

   Component	Configuration pass
   Microsoft-Windows-Deployment\Reseal	oobeSystem
   Microsoft-Windows-International-Core-WinPE\SetupUILanguage	windowsPE
   Microsoft-Windows-Setup\DiskConfiguration\Disk\CreatePartitions\CreatePartition	windowsPE
   Microsoft-Windows-Setup\DiskConfiguration\Disk\ModifyPartitions\ModifyPartition	windowsPE
   Microsoft-Windows-Setup\DiskConfiguration\Disk\CreatePartitions\CreatePartition *	windowsPE
   Microsoft-Windows-Setup\DiskConfiguration\Disk\ModifyPartitions\ModifyPartition *	windowsPE
   Microsoft-Windows-Setup\ImageInstall\OSImage\InstallTo	windowsPE
   Microsoft-Windows-Setup\UserData	windowsPE
   Microsoft-Windows-Shell-Setup\OOBE	oobeSystem
   Optional: Microsoft-Windows-IE-InternetExplorer	specialize

   * This example uses a two-partition configuration. Add a second CreatePartition and a second ModifyPartition component to your answer file by right-clicking the component in the Windows SIM Windows Image pane, and then by selecting the appropriate configuration pass. This action adds a second instance of the CreatePartition and ModifyPartition components to your answer file.

   
   
3. All of the settings you added must appear in the Windows SIM Answer File pane. Under Settings, select the appropriate setting and, in the right-hand column, enter the appropriate value as specified in the following table.
   

   Configuration pass	Component	Value
   1 WindowsPE	Microsoft-Windows-International-Core-WinPE	InputLocale = <Input Locale> For example, en-US SystemLocale = <System Locale> For example, en-US UILanguage = <UI Language> For example, en-US UserLocale = <User Locale> For example, en-US
   1 WindowsPE	Microsoft-Windows-International-Core-WinPE\SetupUILanguage	UILanguage = <UI Language> For example, en-US
   1 WindowsPE	Microsoft-Windows-Setup\DiskConfiguration	WillShowUI = OnError
   1 WindowsPE	Microsoft-Windows-Setup\DiskConfiguration\Disk	DiskID = 0 WillWipeDisk = true
   1 WindowsPE	Microsoft-Windows-Setup\DiskConfiguration\Disk\CreatePartitions\CreatePartition	Order = 1 Size = 200 Type = Primary
   1 WindowsPE	Microsoft-Windows-Setup\DiskConfiguration\Disk\CreatePartitions\CreatePartition	Extend = true Order = 2 Type = Primary
   1 WindowsPE	Microsoft-Windows-Setup\DiskConfiguration\Disk\ModifyPartitions\ModifyPartition	Active = true Format = NTFS Label = System Order = 1 PartitionID = 1
   1 WindowsPE	Microsoft-Windows-Setup\DiskConfiguration\Disk\ModifyPartitions\ModifyPartition	Format = NTFS Label = Windows Order = 2 PartitionID = 2
   1 WindowsPE	Microsoft-Windows-Setup\ImageInstall\OSImage	InstallToAvailablePartition = false WillShowUI = OnError
   1 WindowsPE	Microsoft-Windows-Setup\ImageInstall\OSImage\InstallTo	DiskID = 0 PartitionID = 2
   1 WindowsPE	Microsoft-Windows-Setup\UserData	AcceptEula = true
   1 WindowsPE	Microsoft-Windows-Setup\UserData\ProductKey	Key = <product key> WillShowUI = OnError
   4 Specialize	Optional: Microsoft-Windows-IE-InternetExplorer	Home_Page = <Company Home Page>
   7 oobeSystem	Microsoft-Windows-Deployment\Reseal	ForceShutdownNow = false Mode = Audit
   7 oobeSystem	Microsoft-Windows-Shell-Setup\OOBE	HideEULAPage = true ProtectYourPC = 3 SkipUserOOBE = true

   Important:

   These settings outline a basic unattended installation in which no user input is required during Windows Setup. When the installation is complete, the computer will reboot to audit mode. Audit mode is a stage of Windows Setup that enables you to quickly boot to the desktop, install additional applications and device drivers, and test the installation. Windows Welcome does not run in audit mode, but it will run the next time the computer restarts, once you have run the sysprep command with the /oobe option. Windows Welcome, also called Machine OOBE (out-of-box experience), prompts the end user to read the Microsoft Software License Terms and to configure the computer. For more information about audit mode, see the Customize Windows in Audit Mode topic in the Windows® Automated Installation Kit (Windows AIK) User's Guide (Waik.chm) or http://go.microsoft.com/fwlink/?LinkId=121506. For more information about Sysprep.exe, see the Sysprep Technical Reference topic in the Waik.chm or http://go.microsoft.com/fwlink/?LinkId=121713.

In this step, you validate the settings in your answer file, and then save them to a file.

1. In Windows SIM, click Tools, and then click Validate Answer File.
   The setting values in the answer file are compared with the available settings in the Windows image.
   
2. If the answer file validates successfully, a “No warnings or errors” message appears in the Messages pane at the bottom of the Windows SIM window. Otherwise, error messages appear in the Messages pane.
   
3. If an error occurs, double-click the error message in the Messages pane to navigate to the incorrect setting. Change the setting to fix the error, and then validate again by clicking Validate Answer File. Repeat this step until the answer file validates.
   
4. On the File menu, click Save Answer File. Save the answer file as Autounattend.xml.
   
5. Copy the Autounattend.xml file to the root directory of a USB flash drive (UFD).
   

You now have a basic answer file that automates Windows Setup. For more information about building answer files, see the Phase 3: Preparing and Customizing Your Windows Image topic in the Waik.chm or this http://go.microsoft.com/fwlink/?LinkId=121501.

A reference computer has a customized installation of Windows that you plan to duplicate onto one or more destination computers. You can create a reference installation by using the Windows product DVD and an answer file.

In this step, you create a bootable Windows PE RAM disk on a CD-ROM disc by using the Copype.cmd script. Windows PE RAM enables you to start a computer for the purposes of deployment and recovery. Windows PE RAM boots directly into memory, enabling you to remove the Windows PE media after the computer boots. Once you have booted into Windows PE, you can use the ImageX tool to capture, modify, and apply file-based disk images. For more information about these tools, see the Deployment Tools Technical Reference topic in the Waik.chm or http://go.microsoft.com/fwlink/?LinkId=121497.

1. On your technician computer, click Start, point to All Programs, point to Windows AIK, right- click Deployment Tools Command Prompt, and then select Run as administrator.
   The menu shortcut opens a Command Prompt window and automatically sets environment variables to point to all the necessary tools. By default, all tools are installed at C:\Program Files\Windows AIK\Tools.
   
2. At the command prompt, run the Copype.cmd script:
   

   copype.cmd <architecture> <destination>

   where <architecture> can be x86, amd64, or ia64 and <destination> is a path to a local directory. For example, copype.cmd x86 c:\winpe_x86
   The script creates the following directory structure and copies all the necessary files for that architecture. For example, \winpe_x86 \winpe_x86\ISO \winpe_x86\mount
   
3. Copy ImageX into \Winpe_x86\ISO. For example, type:
   

   copy "c:\program files\Windows AIK\Tools\x86\imagex.exe" c:\winpe_x86\iso\

   Note:
   You can create an optional configuration file called Winscript.ini that will instruct the ImageX tool to exclude certain files during the capture operation. Wimscript.ini should be saved to the same location as the ImageX tool. For more information, see the Create an ImageX Configuration File topic in Opk.chm.

4. Create a Windows PE image (.iso) file by using the Oscdimg tool from the Deployment Tools Command Prompt. For example, type
   

   oscdimg -n -bc:\winpe_x86\etfsboot.com c:\winpe_x86\ISO c:\winpe_x86\winpe_x86.iso

5. Burn the image (Winpe_x86.iso) to a CD-ROM disc. Windows AIK does not include CD-ROM burning software. Use trusted third-party software to burn the image to a CD-ROM disc.
   

You now have a bootable Windows PE RAM CD containing the ImageX tool. For more information about Windows PE, see the Windows Preinstallation Environment (Windows PE) User’s Guide (Winpe.chm).

In this step, you capture an image of your reference computer by using Windows PE and the ImageX tool. Then, you store that image on a network share.

1. On your reference computer, insert your Windows PE media and restart the computer.
   

   Note:
   To boot from the CD/DVD-ROM drive, you may have to override the boot order. During initial boot, select the appropriate function key to override the boot order.

   Windows PE starts, and then launches a Command Prompt window.
   
2. Capture an image of the reference installation by using the ImageX tool located on your Windows PE media. For example, at the command prompt, type
   

   e:\imagex.exe /capture d: d:\myimage.wim "my Win7 Install" /compress fast /verify

3. Copy the image to a network location. You can do this because Windows PE provides network support. For example, at the command prompt, type
   

   net use y: \\network_share\images copy d:\myimage.wim y:

   If necessary, provide network credentials for appropriate network access.
   

After you have an image of your reference installation, you can deploy the image onto new hardware.

In this step, you use the DiskPart tool to format the hard drive, and then you copy an image from the network share. For this example, you can use your reference computer as your destination computer.

1. On your destination computer, insert your Windows PE media and restart the computer by pressing the CTRL+ALT+DEL keys.
   

   Note:
   If this was your reference computer, the hard drive contains an active partition. You must override the boot order to boot from the CD/DVD-ROM drive. During initial boot, select the appropriate function key to override the boot order. If this is a newly assembled computer, the hard drive is unformatted, and you can skip this step.

   Windows PE starts, and then it launches a Command Prompt window.
   
2. Format the hard drive to reflect the disk configuration requirements by using the DiskPart tool from the Windows PE Command Prompt window. For example, type
   

   diskpart select disk 0 clean create partition primary size=200 select partition 1 format fs=ntfs label="system" assign letter=c active create partition primary select partition 2 format fs=ntfs label="Windows" assign letter=d exit

   Note:
   You can create a script with this information by saving it to a text file and by storing it in the same location as your image. To run the script from a Windows PE Command Prompt window, type: diskpart /s <scriptname>.txt where <scriptname> is the name of the text file that includes the Diskpart commands.

3. Copy the image from the network share to your local hard drive. For example, at a command prompt, type
   

   net use y: \\network_share\images copy y:\myimage.wim d:

   If necessary, provide network credentials for appropriate access.
   
4. Apply the image to the hard drive by using the ImageX tool located on your Windows PE media. For example, at a command prompt, type
   

   e:\imagex.exe /apply d:\myimage.wim 1 d:

5. Use BCDboot to initialize the Boot Configuration Data (BCD) store and copy boot environment files to the system partition. For example, at a command prompt, type
   

   d:\windows\system32\bcdboot d:\windows

   For more information about BCDboot, see the BCDboot Command-Line Options topic in the Waik.chm or http://go.microsoft.com/fwlink/?LinkId=121711.
   

Your custom image is now deployed onto your destination computer. The computer is ready for customer delivery. Repeat Step 5: Deploying from a Network Share for each additional computer that you deliver.

You have now completed a basic end-to-end deployment scenario by using an image-based deployment method. You have successfully created your first answer file, a bootable Windows PE CD, and your first custom Windows image. You also have a basic understanding of how to use Windows SIM and the ImageX and Windows PE technologies.

The next step is to make additional customizations to your answer file and to expand your knowledge of the deployment tools. For more information about customizing and deploying your Windows image, see the Windows Automated Installation Kit Scenarios topic in the Waik.chm or http://go.microsoft.com/fwlink/?LinkId=120339.